Technical Specification

  CHARACTERISTICS   CEN STANDARDS & ISO SATANDARDS    INDIAN STANDARDS   OUR VALUE   METHOD OF TESTING
1. Deviations in Length & Width Max. ± 0.5% Max. ± 0.15% Max. ± 0.15% EN-96,IS 13630 (Part-1)
2. Deviations in Thickness Max. ± 0.5% Max. ± 0.4% Max. ± 0.4% EN-96,IS 13630 (Part-1)
3. Surface Flatness Max. ± 0.5% Max. ± 0.22% Max. ± 0.22% EN-96,IS 13630 (Part-1)
4. Rectengularity Max. ± 0.5% Max. ± 0.15% Max. ± 0.15% EN-96,IS 13630 (Part-1)
5. Water Absorption > 10 % > 10 % 14 to 16 % EN-90,IS 13630 (Part-2)
6. Scratch Hardness Of Surface (Moh's) Min 3 Min 3 Min 3 EN-101,IS 13630 (Part-13)
7. Crazing Resistance Required Min 4 Cycle
© 7.5 Bars
Min 4 Cycle
© 7.5 Bars
EN-105,IS 13630 (Part-9)
8. Chemical Resistance Required
|| Agreed
Required
|| Agreed
Resistance To All Acids EN-122,IS 13630 (Part-8)
9. Thermal Shock Resistance Required Min 10 Cycles Resistant to 10 Cycles EN-104,IS 13630 (Part-5)